200-125 試験過去問 & 200-125 関連日本語版問題集
多くのCiscoの200-125 試験過去問認定試験を準備している受験生がいろいろな200-125 試験過去問「CCNA Cisco Certified Network Associate CCNA (v3.0)」認証試験についてサービスを提供するサイトオンラインがみつけたがShikenPASSはIT業界トップの専門家が研究した参考材料で権威性が高く、品質の高い教育資料で、一回に参加する受験者も合格するのを確保いたします。
Ciscoの認定試験は現在とても人気がある試験ですね。この重要な認証資格をもうすでに手に入れましたか。例えば、もう既に200-125 試験過去問認定試験を受験したのですか。もしまだ受験していないなら、はやく行動する必要がありますよ。こんなに大切な資格を取らなくてはいけないです。ここで言いたいのは、どのようにすれば効率的に200-125 試験過去問認定試験の準備をして一回で試験に合格できるのかということです。
試験番号：200-125試験科目：「CCNA Cisco Certified Network Associate CCNA (v3.0)」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2017-10-09
問題と解答：全737問 200-125 日本語版と英語版
NO.1 Which IPv6 header field is equivalent to the TTL?
A. Flow Label
B. TTD
C. Hop Count
D. Hop Limit
E. Scan Timer
Answer: D
200-125 特典 200-125 内容
NO.2 If all OSPF routers in a single area are configured with the same priority value, what value
does a router use for the OSPF router ID in the absence of a loopback interface?
A. the lowest IP address among its active interfaces
B. the priority value until a loopback interface is configured
C. the IP address of the first Fast Ethernet interface
D. the IP address of the console management interface
E. the highest IP address among its active interfaces
Answer: E
200-125 初心者
Explanation: Ordinarily the loopback interface would be selected as the router ID. In the event that
no loopback interface is configured, the router ID will be the first active interface that comes up on
the router. If that particular interface has more then one IP address, then the highest address will be
selected as the Router ID.
NO.3 Which feature allows a device to use a switch port that is configured for half-duplex to access
the network?
A. IGMP
B. split horizon
C. CSMA/CD
D. port security
Answer: C
200-125 特典
Explanation:
Ethernet began as a local area network technology that provided a half-duplex shared channel for
stations connected to coaxial cable segments linked with signal repeaters. In this appendix, we take a
detailed look at the half-duplex shared-channel mode of operation, and at the CSMA/CD mechanism
that makes it work.
In the original half-duplex mode, the CSMA/CD protocol allows a set of stations to compete for access
to a shared Ethernet channel in a fair and equitable manner. The protocol's rules determine the
behavior of Ethernet stations, including when they are allowed to transmit a frame onto a shared
Ethernet channel, and what to do when a collision occurs.
Today, virtually all devices are connected to Ethernet switch ports over full-duplex media, such as
twisted-pair cables. On this type of connection, assuming that both devices can support the full-
duplex mode of operation and that Auto-Negotiation (AN) is enabled, the
AN protocol will automatically select the highest-performance mode of operation supported by the
devices at each end of the link. That will result in full-duplex mode for the vast majority of Ethernet
connections with modern interfaces that support full duplex and AN.
NO.4 What is the effect of the overload keyword in a static NAT translation configuration?
A. It enables the use of a secondary pool of IP addresses when the first pool is depleted.
B. It enables port address translation.
C. It enables the outside interface to forward traffic.
D. It enables the inside interface to receive traffic.
Answer: B
200-125 認定
ShikenPASSは最新の1z1-595試験問題集と高品質のVCS-323認定試験の問題と回答を提供します。ShikenPASSの1Z1-803 VCEテストエンジンと400-101試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のMB2-716トレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
